Top-mounted roller shutters are only used for new buildings or when replacing windows in existing buildings. The roller shutter box is placed on the window or door frame. Guide rails are screwed onto the outside of the window frame, and only later is the entire set installed in the window recess. This makes the roller shutter box invisible and the shutter appears to be part of a window.
MX1200 is a roller shutter system for renovation and monoblock windows. The specific construction of the box with an inspection hatch at the front enables the roller shutter to be installed on window frames from 60 to 180 mm.
TL1000- is a system that can be used in newly built and modernized facilities. The access cover is installed on the bottom of the box. This enables the box to be build up from the interior without hindering service access to the shutters. This roller shutter model can be mounted on windows with a frame thickness of up to 95mm.
CC1000- is the basic system of overhead shutters. The access cover is installed on the front of the box. These can be installed on windows with max. frame thickness of up to 95mm.
TPK1000K – is a system that can be mounted on wide window frames up to 202 mm, (with broadening to 264mm). This system enables the revision cover to be installed from the bottom (with a build-up box from the inside) or from the front (when installing on a wide window frame).
Also available in a version with mosquito net, (frames up to 188mm, with broadening to 250mm).